Home > Driver FAQ, FAQs, XP Drivers > Ten Steps To Recovering An Older Gateway Computer

Ten Steps To Recovering An Older Gateway Computer

December 30th, 2013 Leave a comment Go to comments

An older Gateway computer makes for a fine gift to the local school, retirement home, or job center. You can also hand down unwanted systems to help younger relatives succeed in school. Recovering the system and restoring it to the factory settings ensures that none of your personal files or data is left on the hard drive while providing the new user with the best possible performance. The process is the same for both desktops and laptops from the manufacturer, and it is easy enough for beginners to complete.

1. Find The Model Number

Without the model number on hand, it’s a pain to try and figure out exactly what the system needs, especially if it isn’t responding at this point due to viruses or driver problems. Flip over any notebooks or laptops and check for a label on the bottom with a 10 or 12 digit number. Don’t be alarmed if there are letters mixed in to help distinguish your exact model. Desktop and tower units likely have a label on the back, but you may need to tip it over and look on the bottom.

2. Gateway System Recovery

Once you know your model from the number and a quick search on the Gateway support website, you can find out if your computer includes the Gateway System Recovery partition. This service was provided for all systems shipped after the end of 2004, so only the oldest systems should lack this kind of support. Each hard drive with this recovery option includes a hidden partition containing all of the drivers and operating system files, but you will need to burn them onto a CD or DVD in order to use them for re-installation.

3. Creating Or Ordering A Recovery Disc

If the system is working and accessible, you can create your own recovery discs to reset to the factory original settings. Follow these steps:

  1. Click on the Start Menu icon.
  2. Navigate to the Programs tab, then select the System Recovery Access listing.
  3. Select the type of operating system, driver, or application restore disc you want to burn. Insert the appropriate media, then follow the disc creation steps on the screen.

You can also order driver recovery discs and supplies for reinstalling Windows XP from Gateway Support, but there are small fees and shipping costs associated with this option.

4. Using A Recovery Disc

Whether you make the disc yourself or find the original one shipped with the manual, you can use it to bring the system back to a fresh slate. Start by inserting the appropriate disc, then restart the system. These discs are designed to open when the computer boots so system files can be loaded. The boot screen should offer to open the disc and perform installation services. If it doesn’t, you can press F8 during the booting process to open the loading screen and choose the disc instead of the hard drive.

5. Operating System Installation

Installing a fresh copy of the Windows XP operating system wipes the hard drive, erasing the files that clutter the hard drive. This frees up space and can give plenty of storage for new material, but it also removes damaged and corrupted files to replace them with working copies. Take off anything you want to keep before beginning any driver or operating system recovery processes. Using these recovery discs leaves you with an older version of the XP kit, so run Windows Update as soon as possible after the computer starts once again.

6. Spot Missing Drivers

Once you’re working with a fresh copy of the OS, you can work to restore drivers and make sure you have them all. Open the Device Manager and check for the yellow warning icons that indicate problems. You can use the tools provided through the Device Manager to install files on your own, or try picking up a complete driver suite and get the best shot at solving all of the missing models at once. You may need to remove hardware and replace it if drivers can’t be found or if you suspect damage.

7. Reinstall Software

Computers that will be donated should be given away at this point, but owners that plan to keep and use older Gateway units can start reinstalling software now. Stick with browsers, word processors, and games that run on low resources if the computer is more than a few years old. You may find it quite bogged down and unable to smoothly complete tasks if you overload it with multitasking software and recent releases.

8. Upgrade The Memory

Nothing improves the performance of an aged Gateway computer like a RAM upgrade. Just a one GB upgrade is enough to make it easier for the processor to handle modern software. Find out what type of RAM you need by:

    • Checking the manual and documentation that came with your computer.
    • Searching with your model number on the Gateway website and noting the type of upgrades they recommend.
    • Visiting a memory manufacturer’s website, like Crucial.com, and using the automatic scanning programs provided to discover what you need to purchase.

9. Gateway Support

If something goes wrong, you may be able to look up the issue on Gateway Support. Older computers don’t qualify for free phone support, but customer service is available for various fees. Use the help center and the official forums to get help from experts to take care of your problems yourself and restore a computer that is far beyond the limits of its warranty.

10. Set Up Antivirus

Finally, protect your newly recovered computer with an appropriate antivirus program. When processing power and memory is limited, stick with simple programs designed to protect resources. You may find it hard to browse the web or work on tasks otherwise. Pick a suite offering spyware and malware protection as well so you don’t have to clutter up the space with multiple programs all running at once.

Categories: Driver FAQ, FAQs, XP Drivers Tags:
  1. No comments yet.
  1. No trackbacks yet.